• expired

NZ VPS Hosting 2GB RAM, 25GB SSD, 1 IP, 2TB Bandwidth $2/Month NZD @ Hostperl

00

NZ VPS_1

Cores - 4 vCore
RAM - 2GB
Space - 25GB SSD
Usable IPs - 1
Bandwidth - 2 TB
Location - Auckland, NZ
Support - 24X7

Price - $2/mo NZD (For first 2 Months)

NOTE - For only first 10 users and for place order please contact on [email protected].

Related Stores

hostperl.com
hostperl.com

closed Comments

  • What's the price after 2 months? Because i don't see the plan listed on your website, just similar plans.

    • Hi,

      $8/mo NZD.

  • Good deal for a test, but they only provisioned 1 vCore, not 4, so not sure whether the poster stuffed up or whoever provisioned it.

    I hope this is just a mistake rather than some bait and switch bullshit.

    CPU Information
    Total CPU : 2700 MHz

    Basic System Information:

    Processor : Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz
    CPU cores : 1 @ 2699.954 MHz
    AES-NI : ✔ Enabled
    VM-x/AMD-V : ❌ Disabled
    RAM : 1.9 GiB
    Swap : 50.0 MiB
    Disk : 24.7 GiB

    fio Disk Speed Tests (Mixed R/W 50/50):
    Block Size 4k (IOPS) 64k (IOPS)
    Read 15.18 MB/s (3.7k) 45.58 MB/s (712)
    Write 15.19 MB/s (3.7k) 45.80 MB/s (715)
    Total 30.38 MB/s (7.5k) 91.38 MB/s (1.4k)
    Block Size 512k (IOPS) 1m (IOPS)
    ——— —- —— —— ——
    Read 104.78 MB/s (204) 124.37 MB/s (121)
    Write 110.35 MB/s (215) 132.65 MB/s (129)
    Total 215.14 MB/s (419) 257.03 MB/s (250)
    • Hi,

      Dont get confused in NZD or USD. We mentioned price in USD on website.

      And check the processor once again, yes during provision we made mistake because of custom configuration. We apologise for it.

      • You are right about the price, I removed the mention of that.

        Does it take a while for the VPS to display the correct CPU configuration? All I can see that has changed is:

        CPU Information
        Total CPU : 1200 MHz

        • Hi,

          Yes, sometimes it will take time.

          • @hostperl: Cool, thanks. I'll see how it goes.

            • @Kiwi: Most Welcome..!!

Login or Join to leave a comment