Dewalt FV Advantage 2 Piece Combo Kit $899 @ The Tool Shed ($764.15 via Pricematch Mitre10 + Bonus Angle Grinder via Redemption)

50

Go to Deal

hamez on 24/07/2022 - 20:37 thetoolshed.co.nz (199 clicks)
Last edited 25/07/2022 - 13:20 by 1 other user

Mitre10 advertise the DeWalt FV Advantage 2 Piece Combo Kit 18 Volt with a redemption offer (DeWalt 18v angle grinder) for $1049.

Toolshed have a special on with the same kit advertised for $899.

Kit Includes:

1 x DCD999 FLEXVOLT ADVANTAGE Hammer Drill
1 x DCF887 3 Speed Impact Driver
1 x DCB546 FLEXVOLT 6Ah battery
1 x DCB184 18v 5Ah battery
1 x DCB116-XE Multi Voltage Charger
1 x DWST83345-1 TSTAK Carry Case

Using the Mitre10 price promise pick this kit up for $764.15.

The redemption is still available with the price match and is done through the DeWalt website. Now remember your Airpoints card plus put this on your Airpoints credit card for a few extra Airpoints 🙂

There's a few DeWalt kits about and there's a few variables when it comes to the model of drill in the two piece pack. While there's a cheaper drill driver combo this pack has the DCD999 drill (top of the range in the DeWalt 18v drill department). One downside is the kit comes with the older DeWalt slow charger not the latest fast chargers.

I'm looking into the best deal to pickup a few skins so chuck your comments below if you've got more to add 🙌🙌

EDIT:

Brought some skins today:

For skins; using the Mitre10 price match; match the prices from i-tools

Circular saw: DCS573N-XE Mitre 10 = $479, i-tools = $299. with the price promise $254.15
https://www.i-tools.co.nz/collections/dewalt-20v-max/product…
https://www.mitre10.co.nz/shop/dewalt-184mm-circular-saw-ski…

Multitool: DCS356N-XJ Mitre10 = $399, i-tools = $259. with the price promise $220.15
https://www.i-tools.co.nz/collections/dewalt-20v-max/product…
https://www.mitre10.co.nz/shop/dewalt-multi-tool-skin-18-vol…

Related Stores

The Tool Shed

• 

  Wakrak on 24/07/2022 - 20:51

  +2

  $894 at Bunnings
  = $759.90 after pricematch at M10

• 

  hamez on 24/07/2022 - 21:01

  Nice. We don't have a local Bunnings so saved me a trip into Hamilton.

• 

  hamez on 25/07/2022 - 13:21

  Edit: added some deals on the skins. :)

  • 

    limepanda on 25/07/2022 - 14:40

    How did you get away with that? As far as I can tell i-tools is online only which Mitre10 isn't supposed to price beat. The Mitre10 near me is pretty pedantic about it, they will compare skus, product codes, and make sure it is in stock locally before honoring a price beat.

    • 

      hamez on 25/07/2022 - 15:07

      They said as long as they have a store (in this case an address on their website in Paraparaumu), and they do same-day delivery (not sure how that works) considering I'm 600km away. Perhaps try a different store. When I brought the drill and driver combo the guy was super casual; worked out the price discount on his watch haha. The skins were a lot more pedantic and did extra checks (two different Mitre10 stores) Perhaps some of it is luck? Worst case I would have just ordered from i-tools.